AC Vs DC voltage calculation

The AC Vs DC voltage calculation is done according to the laws of physics. You have to know the current type, power value, current value, and power factor.

Voltage

Voltage, electric potential difference, electric pressure or electric tension is the difference in electric potential between two points. The difference in electric potential between two points (i.e., voltage) in a static electric field is defined as the work needed per unit of charge to move a test charge between the two points.

In the International System of Units, the derived unit for voltage is named volt. In SI units, work per unit charge is expressed as joules per coulomb, where 1 volt = 1 joule (of work) per 1 coulomb (of charge).

The official SI definition for volt uses power and current, where 1 volt = 1 watt (of power) per 1 ampere (of current). This definition is equivalent to the more commonly used ‘joules per coulomb’. Voltage or electric potential difference is denoted symbolically by ∆V, but more often simply as V, for instance in the context of Ohm’s or Kirchhoff’s circuit laws.

Power

Electric power, like mechanical power, is the rate of doing work, measured in watts, and represented by the letter P. The term wattage is used colloquially to mean “electric power in watts.” The electric power in watts produced by an electric current I passing through an electric potential (voltage) difference of U is:

AC Vs DC voltage calculations
AC Vs DC voltage calculations

where

  • P is electric power in watts
  • cos φ is the power factor
  • I is the electric current in amperes
  • U is electric potential or voltage in volts

Power factor

The power factor of an AC electrical power system is defined as the ratio of the real power absorbed by the load to the apparent power flowing in the circuit

The power factor is defined as the ratio of real power to apparent power. As power is transferred along a transmission line, it does not consist purely of real power that can do work once transferred to the load, but rather consists of a combination of real and reactive power, called apparent power. The power factor describes the amount of real power transmitted along a transmission line relative to the total apparent power flowing in the line.

Current

An electric current is the rate of flow of electric charge past a point or region. An electric current is said to exist when there is a net flow of electric charge through a region. In electric circuits this charge is often carried by electrons moving through a wire. It can also be carried by ions in an electrolyte, or by both ions and electrons such as in an ionized gas (plasma).

One ampere is the flow of electric charge across a surface at the rate of one coulomb per second.  Electric current is measured using a device called an ammeter.

The ampere symbol: A, often shortened to “amp”, is the base unit of electric current in the International System of Units (SI). It is named after André-Marie Ampère (1775–1836), French mathematician and physicist, considered the father of electrodynamics.

The calculation of voltage is very important when you have to calculate the wire size.

Leave a Reply

Your email address will not be published. Required fields are marked *